Pool Robot Not Working? Repair or Replace It in Mallorca

A pool robot that stops, will not climb the wall or leaves dirt behind is more often blocked or kinked than broken. This guide sorts the usual faults by symptom, marks what an owner can check and where a technician starts, and gives a checklist for choosing between repair and replacement. The fault lists come from manufacturers’ own manuals and guides, named where they are used.
Robots differ in how they run. A hydraulic robot works off the pool’s filtration pump, a mains robot has a power supply and a floating cable, and a cordless robot has a battery. The symptom sections draw on the Maytronics Dolphin Classic 19 manual (cabled), the Zodiac MX8 manual (hydraulic) and Aiper’s troubleshooting pages (cordless). The manual for the exact model is always the authority.
Key takeaways
- The manuals list the same first checks: empty the filter basket, clear debris from the impeller, tracks and wheels, straighten the cable and look for algae on the walls.
- Worn brushes and tracks are replaceable parts. The Maytronics manual lists replacing a worn brush as the fix for a robot that moves but does not clean.
- One brand’s guide puts the line at a repair quote above half the price of a comparable new cleaner, or a robot older than five years. That is a rule of thumb from a seller, not a standard.
- Under the consumer law text published in the BOE, a seller is liable for faults in new goods that appear within three years of delivery. Check the purchase date before paying for a repair.
- Opening the sealed body, working on the motor or circuit board, or replacing a damaged power cable is work for the maker’s service or a technician.
Repair or replace a pool robot: the decision checklist
Go through these in order. The first point that settles the question ends the list.
- Purchase date and warranty. Find the receipt and the warranty card. Warranty length differs by brand and model: Aiper’s FAQ says its units usually come with a one to two year warranty. Check the card for the exact model.
- Age. iGarden’s guide says a robotic pool cleaner usually lasts three to seven years with regular care, and that past five years replacement starts to make sense even when the current fix is cheap.
- Which part failed. A filter, brush, track or kinked cable is a small repair. A drive motor, pump motor or circuit board is not: the same guide puts internal repairs of that kind at two to five hundred dollars each before labour.
- The written quote. Ask what it includes (diagnosis, parts, labour, transport) and compare the total with the current price of a comparable new unit. iGarden’s guide says to replace when a repair quote is more than half that price, and notes that out-of-warranty repairs add diagnostic, labour and shipping fees on top of parts.
- The basic checks. If the checks in the symptom sections below have not been done, do them first. They cost nothing and cover the most common causes listed in the manuals.
- Spare parts for the model. Aiper’s troubleshooting pages say that for its Surfer S1 the filter basket, charging cable and propeller blades are not sold on its website, so a cheap part can still be hard to get. Ask before deciding.
Spanish consumer law adds a separate route for a recent purchase. In the consolidated text of the Ley General para la Defensa de los Consumidores y Usuarios on boe.es (last updated 4 November 2026), article 120 makes the seller liable for lack of conformity that appears within three years of delivery of goods, article 121 presumes that faults appearing in the first two years existed at delivery, and article 118 lets the consumer choose between repair and replacement, free of charge. How the articles apply to a given robot depends on the facts of the purchase, and rules change, so read the current text or ask a consumer advice office. This is not legal advice.
| Situation | Leans toward | Based on |
|---|---|---|
| Within the warranty or the legal period | Claim through the seller or maker first | Warranty card; BOE articles 118, 120 and 121 |
| Fault is a filter, brush, track or kinked cable | Repair or swap the part | Maytronics and Zodiac manuals |
| Robot over five years old, fault in motor or circuit board | Replace | iGarden’s guide, the five year line |
| Quote above half the price of a comparable new unit | Replace | iGarden’s guide, the half price rule |
| Basic checks done, fault still there | Get a diagnosis before deciding | Maytronics blog: abnormal performance goes to the manual, then the dealer |
Faults by symptom: stops, will not climb, no suction, tangled cable
Each block gives the manuals’ checks first and ends where the owner’s part stops. Switch the robot off and unplug the power supply before touching the body, tracks or impeller.
Pool robot stops or does not move
For a cabled robot the Maytronics manual lists two causes: the cable is not properly connected to the power supply, or something blocks the impeller, tracks or wheels. It says to check the connection, unplug the power supply, open the impeller cover to see that nothing is trapped, then confirm the tracks and wheels are free. For a hydraulic robot the Zodiac manual adds the pool side: the bottom plug closed, skimmer baskets and pump prefilter emptied, debris cleared from the motor area, and no air in the filtration circuit (bubbles in the pump prefilter or a low water level). Aiper’s pages say a stuck robot is usually caught on a drain cover, ladder or step, or has debris in a drive wheel or a tangle in the brush roll. If the robot still does not move, or the power cable is damaged, the Zodiac manual’s warnings say a damaged cable must be replaced by the maker, its service agent or a qualified technician.
Pool robot does not climb the wall
The Maytronics manual lists a clogged filter basket, algae on the walls, an unsuitable pH, debris in the impeller housing and worn or unsuitable brushes. Its remedy for algae is to check the chemical levels, adjust them and scrub the walls. The Zodiac manual adds water flow and the position of the hose float, and says slippery algae call for shock chlorination and a slightly lower pH. Both manuals attach a rule to shock treatment: Maytronics says to take the robot out of the pool whenever the water is chemically shocked, and Zodiac says not to use the robot after a shock chlorination. Cordless models add their own settings: Aiper says wall climbing needs a full battery and Floor and Wall mode selected in the app, and some of its models are floor-only. Maytronics also notes that below 15 °C climbing performance may be affected. A robot that still slides off with clean filters, clean walls and sound brushes is a case for the maker’s service or a technician.
Pool robot moves but does not clean
Maytronics lists three causes for a robot that moves but leaves dirt behind: a clogged filter basket, debris in the impeller housing or cover, and worn front or rear brushes. The remedy is to clean the basket and the impeller area and to replace a worn brush. Aiper calls a clogged filter basket the number one cause of reduced suction on its Scuba S3, and a clogged filter or low battery the usual cause of poor cleaning on its Scuba S1. Maytronics advises rinsing the filter as soon as the robot leaves the water, before debris dries, and cleaning the impeller every two weeks. If the filter and impeller are clean and suction is still weak, that is a job for service.
Pool robot cable tangles or kinks
The Maytronics manual’s remedy for a kinked cable is to stretch it out completely and let it sit in the sun, and to release twists once a week by disconnecting the cable from the power supply, straightening it, then coiling and reconnecting it. Its blog adds that the cable should be coiled like a garden hose. A robot that cleans only part of the pool may not have enough cable released, or the power supply may be badly placed: the manual asks for at least 3 m from the pool. For a hydraulic robot, the Zodiac manual says to lay knotted hose sections flat in the sun until they straighten, to check that the hose is long enough, to check that the swivel joint on the robot turns freely, and to store the hoses horizontally rather than coiled.
Worn brushes and tracks
Brushes and tracks wear with use. The Maytronics manual says to replace a worn brush, or one that is not the right model for smooth pool surfaces, and the Zodiac manual has a step by step procedure for changing the tracks. iGarden’s guide says brushes and tracks on its robots should be replaced every two years or when the wear indicator shows. Treat that as one maker’s interval, not a rule for every model. The deciding point is the part: if the maker or a dealer still sells brushes and tracks for the model, this is a repair worth doing. If not, the part supply, not the fault, decides the question.
Can pool water or sun wear out a robot cleaner?
Only the manuals’ own limits are stated here. The Maytronics Classic 19 manual lists chlorine at most 4 ppm, pH 7.0 to 7.8, water temperature 6 to 35 °C and salt (NaCl) at most 5,000 ppm, and it names water that does not meet the specifications, together with algae, as a cause of a robot moving in circles. The Zodiac manual gives 15 to 35 °C for its hydraulic robot. For plastic parts, Maytronics says to rinse the robot, cable and filter on removal and keep them in shade; Zodiac says not to store the robot in direct sun and to store it dry and protected from frost.
Scale from hard water, on equipment and in salt cells, is covered in the article on hard water and pool scale on Mallorca. None of the manuals read for this guide says how hard water affects a robot, so no claim about it is made here.
What to ask a repair service before handing the robot over
Before handing over or sending a robot, these questions make quotes comparable.
- Which brands and models does the service handle, and is it an official service point for the brand? The Zodiac manual names the maker, its service agent or a qualified technician for cable replacement, and Maytronics points to a certified service station for objects stuck inside the robot.
- Does the quote cover diagnosis, parts, labour and transport both ways, and is a diagnosis fee deducted if the repair goes ahead?
- Is the work done at the pool or in a workshop, and who moves the robot?
- Is the part for this model in stock or on order, and is it a maker part?
- Does the repair carry its own warranty, and for how long?
- What happens if the quote is declined: is the robot returned, and at whose cost?
One example of a priced mail-in route: the Spanish online store Piscinarium lists a robot repair service for Zodiac, Dolphin, AstralPool and BORA robots at 98.90 EUR, described as covering collection from the customer’s home and the handling of fault diagnosis and quote. The part of the listing read for this guide does not say whether VAT is included or whether the fee is credited against a repair, so ask before sending a unit. It is one shop’s listing, read on 14 November 2026, and not a market price.
Where to get repair quotes in Mallorca
For a robot still under warranty, the seller or maker is the first call. For the rest, the free quote form on this site passes a request to pool repair companies, who then quote directly. Choose Pool Repair as the project type and write that the job is a robot cleaner, with brand and model. Whether a listed company takes robot work is for that company to say in its quote.
Related reading: the pool repair guide, the pool repair service page, the equipment warning signs guide for pumps and salt systems, and the pool maintenance page.
How long does a pool robot last?
iGarden’s guide says a robotic pool cleaner usually lasts three to seven years with regular care. Wear parts such as brushes, tracks and filters, and the model itself, change that.
Is it worth repairing a pool robot?
It depends on age, the failed part and the quote. One brand’s guide recommends replacing when the quote is more than half the price of a comparable new cleaner, or when the robot is past five years old. A new filter, brush or track on a younger robot is the usual case for repair.
Why does my pool robot not climb the wall?
The usual causes in the manuals are a clogged filter basket, algae on the walls, an unsuitable pH, debris in the impeller housing and worn brushes. Some cordless models are floor-only, and others need Floor and Wall mode selected.
Does consumer law cover a pool robot in Spain?
In the BOE text of the consumer law, the seller is liable for lack of conformity that appears within three years of delivery of goods bought by a consumer. Whether a fault counts depends on the facts, so check the current text on boe.es or ask a consumer advice office.
Conclusion
A stopped robot is usually a clogged filter, a blocked impeller or a kinked cable, and those cost nothing to check. Work through the symptom list, then the repair or replace checklist, and ask for a written quote before paying. To compare quotes from pool repair companies, request free quotes here, choosing Pool Repair as the project type.
This might be interesting to you

Pool permits in Mallorca: a step-by-step guide
How the building licence for a pool works in Mallorca: which permit applies, rustic land limits, the...

Pool crack repair in Mallorca: when a crack is serious
Finding a crack in your pool is unsettling, but not every crack is a crisis. Most cracks in Mallorca...

Smart pool technology: the future of Mallorca pools
For years a pool meant buckets of chemicals, guesswork and a pump that ran whether you needed it or ...

Pool Equipment Warning Signs: Astralpool, Kripsol and Fluidra Owners Guide
Flow warnings, salt alarms, pressure creep. What the most common warnings on island equipment actual...